We test the drinking water quality for many constituents as required by state and federal regulations. This report shows the results of our monitoring for the period from 2019-01-01 to 2019-08-17.
Este informe contiene información muy importante sobre su agua para beber. Favor de comunicarse [Enter Water System’s Name Here] a [Enter Water System’s Address or Phone Number Here] para asistirlo en español.
这份报告含有关于您的饮用水的重要讯息。请用以下地址和电话联系 [Enter Water System’s Name Here]以获得中文的帮助: [Enter Water System’s Address Here] [Enter Water System’s Phone Number Here]
Ang pag-uulat na ito ay naglalaman ng mahalagang impormasyon tungkol sa inyong inuming tubig. Mangyaring makipag-ugnayan sa [Enter Water System’s Name and Address Here] o tumawag sa [Enter Water System’s Phone Number Here] para matulungan sa wikang Tagalog.
Báo cáo này chứa thông tin quan trọng về nước uống của bạn. Xin vui lòng liên hệ [Enter Water System’s Name Here] tại [Enter Water System’s Address or Phone Number Here] để được hỗ trợ giúp bằng tiếng Việt.
Tsab ntawv no muaj cov ntsiab lus tseem ceeb txog koj cov dej haus. Thov hu rau [Enter Water System’s Name Here] ntawm [Enter Water System’s Address or Phone Number Here] rau kev pab hauv lus Askiv.
BLUE LAKE SPRINGS MUT WTR is located in ARNOLD (CALAVERAS CO.). The primary water source type is Surface Water Purchased. This water system services 1,716 connections, and serves a total population of 5,100 individuals.
This water system is officially IN COMPLIANCE.
Of the 54 chemicals tested for in your water system, 25 chemicals were detected, and 17 average annual chemical findings exceeded their MCL, though this dos not necessarily constitute an MCL violation.
In the plot below, the Maximum Contaminant Level (MCL) is shown as a black horizontal dashed line. Each contaminant tested for in your water utility is represented by a vertical bar, and the height of the bar indicates the level of contaminantion of that sample. Any contaminant at or exceeding the black horizontal dashed line indicates contaminated water, and values under the black line indicate safe drinking water.
Hover over the bars to see more information for each contaminant.
29 other chemicals were tested for and NOT detected, including:
ALUMINUM, ANTIMONY, ARSENIC, BARIUM, BERYLLIUM, BROMODICHLOROMETHANE (THM), BROMOFORM (THM), CADMIUM, CARBONATE ALKALINITY, CHROMIUM (TOTAL), COPPER, DIBROMOACETIC ACID (DBAA), DIBROMOCHLOROMETHANE (THM), FLUORIDE (F) (NATURAL-SOURCE), FOAMING AGENTS (MBAS), HYDROXIDE ALKALINITY, IRON, LEAD, MANGANESE, MERCURY, MONOBROMOACETIC ACID (MBAA), MONOCHLOROACETIC ACID (MCAA), NICKEL, NITRATE (AS N), NITRITE (AS N), SELENIUM, SILVER, THALLIUM, ZINC.
Because they were not detected, these chemicals are not included in the chart above.
When a measured contaminant exceeds the MCL, a set of regulatory actions is taken to improve water quality. All regulatory actions taken during the period of this report are shown below:
Table or text summarizing this.
more lay interpretation for people and how it applies to user. Scope language is in this template.
Is the water system treating for the detect above the MCL? Need to show this in the report.
Explore the data in the interactive table below, or download as an Excel or CSV file.
This Consumer Confidence Report was automatically generated, and hence, the data herein may be incomplete or inaccurate. The authors claim no liability or responsibility for data quality. This data represents the average result of all post-treatment samples from the period from 2019-01-01 to 2019-08-17. For questions about your local water quality, contact your water system.
: address goes here
: phone number goes here
: email contact goes here
Maximum Contaminant Level (MCL) refers to the highest level of a contaminant that is allowed in drinking water. Primary MCLs are set as close to the PHGs (or MCLGs) as is economically and technologically feasible. Secondary MCLs are set to protect the odor, taste, and appearance of drinking water.
Maximum Contaminant Level Goal (MCLG): The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are set by the U.S. Environmental Protection Agency (U.S. EPA).
Public Health Goal (PHG): The level of a contaminant in drinking water below which there is no known or expected risk to health. PHGs are set by the California Environmental Protection Agency.
If a contaminant has an exceedance of 999%, this indicates a detection for which the MCL is 0. Any number divided by 0 is infinite, thus it is assigned an arbitarty large value (999) to indicate exceedance.
In the barplot and table above, XMOD indicates additional qualifiers on the data.
<: the measured amount did not constitute a chemical detectionV: valid data-: the data can be negative (e.g. radionuclides and Langelier index)F: false positiveI: invalidatedQ: questionable